Time Blocks

The blocks delay the execution of workflow actions or execute actions at a specified time and contains two block types:

• Timer
• Start on date

Timer

The block is used to set a time gap before the next action or message sending. It is placed before a block you want to delay.

Contact confirmation triggers the workflow with a drip welcome series in the example. A new contact receives a welcome email after confirmation, a second email after two days, and a third after the next three days.

To set up Timer, configure one of 2 or both parameters:

• Wait time
• Wait until

You can configure all parameters or only one; at least one parameter should be configured to start a workflow.

Wait Time

Enter the time of delay, and select the parameter to which it will be applied:

• minutes
• hours
• days
• months

Wait Until

In the Wait until parameter, you can specify the time yourself, use data from an additional field of the contact card or from the context parameter (the event that launches the workflow).

Specifying the Time Manually

Here you can select the day of the week and the time for sending.

If you set the sending time at 8:45 a.m. and the workflow starts at 3:00 p.m., the subscriber will receive the message at 8:45 a.m. the next day.

Using the Time from an Additional Contact Field

For example, you can use this option to set up reminders if you collect data in additional fields about the time your subscribers perform specific actions: make purchases, exercise, study, etc.

Select the contact field containing the time you want to wait.

The time from the contact field is based on the contact's time zone and must be sent to the text field in the HH:MM or HH:MM:SS format. If the field of a contact participating in the workflow has a missing or written in an incorrect format value, the corresponding error will be displayed in the launch history of such a workflow.

Using the Time from a Context Parameter

You can use this option to set up reminders if the data about the time your subscribers perform specific actions is not tied to additional fields and you are focusing on actual data — for example, when the last event about the workout start was received.

Specify the event parameter containing the time to wait until.

The time from the event parameter is based on the contact's time zone and must be sent to the text field in the ISO 8601 format. If the value is missing or written in an incorrect format in the event that launches the workflow, the corresponding error will be displayed in the workflow's launch history.

Use Contact’s Time Zone Parameter

Activating this parameter will allow you to send a message at a specific time, taking into account the contact’s time zone.

Parameter Priority

For example, you've configured the following delay parameters:

• wait day;
• send on Monday.
• send time at 8:45 a.m.

The workflow starts on Sunday at 3 p.m. The system waits for 1 day (24 hours). Then it's Monday. The Wait 1 day parameter expires at 3 p.m. on Monday. The system checks the Send parameter. You have chosen Monday, today is Monday, so far everything is fine.

The system checks Send time. It’s set for 8:45 a.m., and the workflow is triggered at 3 p.m. The subscriber will receive the message not this Monday but only the next one at 8:45 a.m.

Start on Date

The block is used to send a message:

• before X days/hours/minutes before the date and time you send in the event;
• with the start time you send in the event or set manually;
• on date from an event parameter or specified in a block.

In the In field, specify when before the date to send the message: 1 hour, 3 days, 10 minutes, etc.

In Before date, you can take the required date from the sent event. In the box below insert the parameter name from the event, for example, ${starDate}.

Activate the Use contact’s time zone parameter to send a message at a specific time, taking into account the contact’s time zone.