| Goal | Prepare the domain and contact list to launch and scale email campaigns |
| Solution |
|
| Results |
|
| Duration | 4 months |
| Resources |
|
| Audience | More than 243,000 email contacts |
A large contact list does not necessarily mean that all of its contacts can be used safely for email marketing. If bulk campaigns are launched without preparing the domain and analyzing the audience, even hundreds of thousands of contacts may fail to deliver results and instead harm email deliverability and sender reputation.
The Vodafone online store faced a similar challenge. Below, we explain which steps helped change the situation and what results the team achieved.
About the Project
The Vodafone online store sells electronics, gadgets, accessories, and home goods from Vodafone Ukraine.
The company regularly runs promotional campaigns and seasonal offers, so it eventually decided to develop email as a channel for customer retention and repeat purchases. To implement the project, the Vodafone online store team turned to the Yespo agency.
At that time, the company had 243,176 email contacts, but most of them did not have enough engagement history to safely launch bulk campaigns.
Before working with the agency, the Vodafone online store team made its first attempt to warm up the domain. They sent a promotional campaign with a special offer, separating Gmail users from users of other mailbox providers.
Why are campaigns split by mailbox provider during domain warm-up?
Gmail, Outlook, Yahoo, and other mailbox providers assess sender reputation differently and use their own email deliverability algorithms. If messages are sent to the entire list at once, it is difficult to understand how each provider responds.
Separate campaigns make it easier to track results accurately and adjust the warm-up strategy when necessary.
The first day of warm-up went well, but the very next day email opens among Gmail users dropped sharply. The team decided to pause further sends and revise the strategy.
After a short break, the team continued the warm-up for a few more days, but eventually paused it completely. The main reason was uncertainty about the quality of the contact list: the team could not identify active users, so increasing send volumes was too risky.
Important
Mailbox providers assess not only email volume but also recipient response. Sending large volumes to an inactive list can damage domain reputation and the deliverability of subsequent campaigns.
Another challenge was that 95% of the contact list used Gmail, one of the strictest mailbox providers in terms of sender reputation requirements. Its algorithms place strong emphasis on user engagement (opens, clicks, complaints, email deletions, and more) and react very quickly to sudden increases in send volume. If a company damages its reputation with Gmail, it risks losing deliverability for almost its entire list.
Goal
To move to regular email marketing, the team first needed to:
- prepare the domain for the safe launch of regular campaigns;
- assess the quality of the existing contact list and determine a safe strategy for working with it;
- build a process for gradually scaling campaigns without putting email deliverability at risk.
Solution
The project was carried out in stages. Each next step was based on the results of the previous one, which made it possible to scale email communications gradually without unnecessary risk.
Domain and Contact List Audit
The Yespo agency marketer found that DMARC records had not been configured for the domain. They were added to protect the domain from spoofing and meet mailbox provider requirements.
Why is this important?
DMARC is one of the basic email sender authentication mechanisms. It helps protect a domain from spoofing, improve email deliverability, and meet Gmail and other mailbox providers’ requirements for bulk senders.
The next step was to assess the domain reputation after the first warm-up attempt and analyze the contact list — more than 243,000 contacts.
Among them:
- 97% were eligible for campaigns;
- 2.5% were blacklisted;
- 0.25% remained unconfirmed;
- 0.06% had unsubscribed.
However, the number of available email addresses alone did not provide enough insight into the quality of the list. Previously, only about 6% of contacts had received campaigns, so for most users there was no history of opens, clicks, or other interactions. Under these conditions, a sharp increase in send volume could negatively affect domain reputation and email deliverability.
The audit results showed that work needed to proceed in two directions: acquiring new subscribers who had explicitly confirmed their interest in receiving emails and gradually activating the existing list while monitoring the response of each segment.
Not sure which contacts are safe to email? We’ll help you assess your contact list and launch email campaigns safely.
Book a consultationBuilding a New Subscriber List
After the first warm-up attempt, the Vodafone online store team stopped bulk campaigns to the existing list and decided to focus on attracting new subscribers.
The site already had a basic subscription form in the footer with Double Opt-In (DOI) configured so that only users who consciously agreed to receive emails were added to the list.
During the first month, the footer form attracted about 800 new contacts. After assessing the result, the marketer suggested accelerating list growth with pop-ups offering value in exchange for a visitor’s email address.
The new widget was also connected to a Double Opt-In flow and a welcome workflow. After confirming their subscription, users received a discount promo code, and the next email introduced the benefits of the Vodafone online store.
This approach helped achieve two goals at once: building a list of users who had explicitly confirmed their subscription, and establishing a positive engagement history with new subscribers from their very first emails.
Because DOI and welcome emails are sent immediately after subscription, they usually have high open and click rates. This has a positive effect on sender reputation and helps warm up the domain more safely.
In the first month after the pop-up was launched, it attracted 13,336 new contacts. This audience became the foundation for the next stage: gradually scaling email communications.
The difference between the number of subscriptions and new contacts is explained by the fact that some users who filled out the form were already on the list: the system recorded their repeat subscription but did not create a duplicate contact.
Domain Warm-Up and Campaign Scaling
After launching the new subscriber acquisition mechanics, the Yespo agency marketer continued gradually warming up the domain. Promotional campaigns and trigger workflows, including Double Opt-In and welcome emails, were used to maintain regular audience engagement.
Launching Promotional Campaigns
The first campaigns were sent to the most active subscribers and new contacts who had not received emails before. This approach helped maintain high open rates while gradually bringing new users into regular email communication.
At the initial stage, the audience was split as follows:
- 70% — active contacts;
- 30% — users who had never received campaigns before.
Once domain reputation stabilized and open rates remained high, the ratio was changed:
- 60% — active contacts;
- 40% — users who had not yet received any emails.
Each campaign was sent not to the entire segment at once but in separate batches. The sending rate was also increased gradually, from 50 to 800 emails per minute.
This made it possible to maintain the required ratio of active and new contacts, avoid sudden increases in send volume, and scale campaigns safely.
During the warm-up, the marketer regularly monitored domain reputation in Google Postmaster Tools. At the same time, she took the delay in data updates into account to avoid drawing premature conclusions from incomplete statistics.
Google Postmaster Tools
is designed for trend analysis rather than real-time monitoring. It helps assess how domain reputation changes over time, but warm-up decisions should be based not only on its data but also on campaign metrics.
Launching Trigger Workflows
Alongside promotional campaigns, the team began implementing high-converting trigger workflows available on the Professional plan: “Abandoned Cart” and “Abandoned Browse.”
These messages featured products that users had recently viewed or added to their carts. Because of their high relevance, trigger emails usually receive a better audience response than bulk campaigns.
During warm-up, this had another advantage. Trigger workflows ran automatically: emails were sent in small batches throughout the day, maintaining a steady sending volume throughout the day. High user engagement also helped maintain a positive sender reputation and reduce the risk of complaints.
As a result, triggers not only contributed to additional sales but also supported the overall warm-up strategy.
By combining promotional campaigns, trigger workflows, and a gradual increase in volume, the domain reputation stabilized. This made it possible to expand the active list to 60,000 contacts, build segments of 90,000–100,000 users, and send up to 18,000 emails per day.
Need a domain warm-up plan tailored to your contact list? During a free consultation, we’ll discuss how to scale your email sends without putting your sender reputation at risk.
Book a meetingContact List Segmentation
Once domain reputation stabilized, the team moved on to gradually re-engaging the entire contact list.
Anastasiia Melnychenko, Yespo agency marketer
Working only with active subscribers is not enough. It is important to gradually engage users with different levels of engagement — and to do so without harming deliverability.
At the first stage, each promotional campaign was built from three segments:
- 60% — active contacts;
- 20% — eligible users who had not received campaigns yet;
- 20% — users who had never opened an email.
This approach made it possible to maintain high engagement among the active audience while gradually assessing the response of other segments.
To avoid overloading inactive users, the marketer also introduced an exclusion rule for segmentation. If a contact received five or more emails and did not interact with any of them, they were excluded from subsequent promotional campaigns.
Later, once email marketing was running steadily, the team identified another segment: users who had previously opened emails but eventually stopped interacting with them. This prompted the team to revise the segmentation logic.
As a result, each campaign was built from four groups:
- 60% — active contacts;
- 15% — eligible users who had not received campaigns yet;
- 10% — inactive contacts;
- 15% — users who had never opened an email.
Separate dynamic groups were created for each segment and updated automatically based on user behavior. This made it possible to keep the list structure up to date and move contacts between segments according to their activity.
The effectiveness of this segmentation model was evaluated separately for each contact group:
| Activated overall | Activated overall, % | Of those who had not received campaigns | Of those who had not received campaigns, % | Of those who had not opened emails | Of those who had not opened emails, % |
| 7753 | 16.41% | 6474 | 27.40% | 1279 | 5.41% |
| 174 | 31.32% | 174 | 31.32% | 0 | 0.00% |
| 27 | 17.88% | 19 | 61.29% | 8 | 6.67% |
| 3052 | 18.34% | 2473 | 29.76% | 579 | 6.95% |
| 1912 | 17.69% | 1568 | 29.60% | 344 | 6.24% |
| 123 | 18.72% | 123 | 28.41% | 0 | 0.00% |
| 7787 | 17.18% | 6430 | 28.37% | 1357 | 5.99% |
| 2073 | 17.26% | 1727 | 28.76% | 346 | 5.76% |
The results confirmed that gradually engaging different segments made it possible to systematically activate the contact list without harming domain reputation and to maintain stable email performance.
Once a stable system for working with the contact list was in place, the Yespo agency marketer focused on improving campaign performance.
Despite a consistently high Open Rate of more than 40%, click-through activity remained relatively low. This showed that there was still room for improvement, primarily through more relevant content.
To increase Click Rate (CR), promotional campaigns were segmented by user interests. This increased CR by an average of 3x, and even more in some campaigns.
Results
Over several months of work on the project, the team built a stable email channel for the Vodafone online store that was ready to scale. The domain was prepared for regular campaigns, an active contact list was formed, and a system for gradually activating it was developed.
In the first month after the new widget was launched, the list gained 13,336 new email subscribers. The active list grew to 60,000 contacts, while daily send volume increased to 18,000 emails, with domain reputation remaining consistently high.
The segmentation system made it possible to gradually re-engage users with email campaigns, while personalizing promotional campaigns by interest helped increase CR by an average of 3x. In some segments, up to 31.3% of contacts who had not previously received emails became engaged.
Even after domain reputation stabilized, the team did not start sending campaigns to the entire list. Because some contacts still had no history of interaction with email communications, the team decided to continue engaging them gradually to preserve the results achieved.
Summary
Domain warm-up is not a one-time step before launching email marketing but part of an ongoing contact-list management strategy. Even if a company has hundreds of thousands of email contacts, bulk campaigns can do more harm than good without an understanding of their activity.
The Vodafone online store case shows that effective warm-up is not just about gradually increasing send volumes. Technical domain preparation, acquiring new subscribers, thoughtful segmentation, and launching relevant workflows that maintain high email engagement all play an important role. The combination of these elements helped scale email communications safely and create a foundation for further growth.
The work does not end once warm-up is complete. To maintain high deliverability and audience engagement, it is important to regularly analyze user behavior, keep segments up to date, and gradually bring new contacts into regular email communication.
A contact list with no engagement history, the lack of a clear warm-up plan, and the risk of damaging domain reputation while scaling campaigns are common challenges for companies moving from one-off email campaigns to systematic email marketing.
If this sounds like your situation, book a consultation with Yespo specialists, and we will help you develop a strategy that scales with your business.
